-
-
Industrial robot
Industrial robot is a multi-joint manipulator or or multi-degree-of-freedom machine facing the industrial field.
MORE INFO →
-
-
Heating method of bearing of reducer and matters needing attention
The speed reducer bearing installation when the bearing inside diameter is greater than 70mm, or with the time surplus larger, generally by using the heating method, the bearing hole expansion occurs, when this installation will be saving time, but also to avo...
MORE INFO →
-
-
Early maintenance of gear reducer
Gear, gear reducer, gear manufacturer, gear processing, gear drive
MORE INFO →
-
-
Causes and solving measures of heating of motor and bearing
A motor (also called a motor) is an electromagnetic device that converts or transfers electrical energy according to the law of electromagnetic induction. Its main function is to generate driving torque, as a power source for electrical appliances or various m...
MORE INFO →
-
-
Assembly specifications and installation inspection points of general mechanical components
Every assembly should be checked according to the following items. If the assembly problem is found, it should be analyzed and dealt with in time. Completeness of assembly work, check assembly drawings and check for missing parts. Check the accuracy of each pa...
MORE INFO →
-
-
Bearing installation, use and maintenance necessary
The bearing is a component that can hold and reduce the coefficient of load friction in the course of mechanical transmission. When other parts produce relative motion on each other on the shaft, the parts used to reduce the coefficient of friction in the powe...
MORE INFO →
-
-
The most fundamental factor of gear transmission scheme - Technical and economic comprehensive index
The technical and economic comprehensive index is the most fundamental factor in selecting the gear transmission scheme, especially for the important or large power transmission. General of small power transmission, should be on the premise of meeting working ...
MORE INFO →
-
-
A common method of reducing the starting current of a motor
Usually, the starting methods to reduce the motor starting current are direct start, serial resistance start, self winding transformer starting, star delta decompression start and frequency converter starting to reduce the impact on the power grid.
MORE INFO →
